Відео

Is the single bellcrank system kit or an option?

Hi, can i use The old low profile tower shocks on the t3m v2? Thanks

Nice toy you have there , thanks for the tips you just give us 👍

its time to ask andy for a new hoodie mate :-)

Thanks to the fellows below for their input when asked. Toby Turner Tim Boundy Ryan Reynolds Justin Vergunst Simon Healy Nic Michaelides and a couple whom I have forgotten names. 😢 Sorry.

You ever do this with Traxxas 3.3

Why the esc delayed in initial aceleration?

What is the oginal spring sise 19 or 21?

did you ever finished the build?

Yeah clean ya tip, keep ya girl happy!!

Actually Akshul!

actemium v4 is suitable for rc drifting

Excellent, well done

F7,B3 gives 70/30 split giving more throttle resolution than Break. Many of the new transmitters come with it set that way. That is not a nitro only setting.

Thanks for the info.

Curious, who is Andy you mentioned?

Great video. I’m keen to get a decent starter TC chassis for VTA here in Perth. I’ve narrowed it down to 3 cars: 1) CNRC R3g 2) 3racing Cero Sport s64 3) Express Execute XQ2S The R3 g is cheapest, But the new 3racing Cero Sport has pivot ball suspension all round... which would you recommend? Cheers

Correction on the spacers on the rear top shock mounts. These are 4mm :)

link of the app please ❤

😘

Hello, I've become an absolute fan of your SNRC/MTS video series. Is it possible to get a completed Setup Sheet? I'm from Germany and unfortunately don't understand everything so well. Best regards Michael

Hi i need to know the link of usb software for XPS sport V3

Love the content, cheers from Sydney.

Will this chassis work with the R3??

Wich drive ratio of this car ?

Hi , please do you know wich ration is this car ?

Does xps sport esc got turbo function?

hello, this video is 2 years old , but my programmer is not working with windows 11, the same hardware is ok with my old laptop and windows 10. any help or an updated video would be helpful thanks

This is really cool , but the amount of work to have it at that point is pretty intense just to keep the graphite arms to not be as fragile. I'll just stick to a R3-Pro with plastic arms and be a little slower haha

Gracias desde españa

any different for 36su 36rvs

extremely detail learn a lot thx

Thanks for the video.

hi, what is the internal ratio for this touring car? Thank you

what's the outer diameter of the Tires, thanks for your time

Merece la pena la actualización?

your not wrong if you had a short low speed needle. your carb has a long low speed need which doesn't leave the spray bar so there for must start with idle to 3/4 throttle first. if you start with the high speed needle when you have a long low speed needle you will be overly lean on bottom.

Team Powers / Raceopt AU 🍍Brian commenting here, Your car looked great, best I've seen you drive in a few of those heats. Team (Geek) effort👍 Wild week... 1200km with a caravan up the Newell on Wednesday🤪 Zero spare time running 2 pan car classes definitely not devoid. Love this track just getting harder to see that far . The X12 2018 had 26 lap pace ( similar pace to Yugo Nagashima's 18 🇦🇺🥇) but was too much for my diff Belleville washers and the 1S charger profile at 10A was too slow. It went to a 3-way tie-breaker anyway and we all had a great time. I ran my 2019 FOS 18 x12 setup with ZS and JM Ulti. 🏆🥇TQ 1st Pro 10 - Grant already had done a bit of pro10 testing with his Bundaberg Speedy series win. The setup was just fine-tuned from the 🥈🥉 we had at England Park Speedy series last month that Mr Wicks won and he took this time - thanks for bouncing ideas and banter. I had to run the older Bezerk Litesabre Prototype chassis- added 50g of weight including the 2s Booster Capacitor. My 2.0 Litesabre will be even lighter, especially with the MS Radon🪶🪶🪶 Esc setups Pro 10- 1/12th - Turn settings down for lower grip - especially the 12th boost. site.petitrc.com/.../RadonProV4.1_BrianStewart.../ EPR setup- AMR body central and raked but no gurney. Pitlane prototype test servos in both cars. Maybe a little more droop(pod) to handle the front esses bumps. Zero tweaks all weekend despite a few 💥 I think everything else is the same except the 45A 1S XPS EL ESC ( Entry Level🚀 it still holds the stock track records.) site.petitrc.com/.../X122018_BrianStewart.../

Another Great Video ..

Does this work with other escs

Fantastic video at last someone has explained to me how the midrange needle works …..travelled through net looking for advice on the midrange…..and found your video superb thank you

ᎮᏒᎧᎷᎧᏕᎷ 🌺

Thats a big hit ... How much is bent ?

sorry for the newb question, but do you have 2 sets of capacitors ? I think I see one set, black, next to esc and one set white on the opposite side

Looks good Ren :)

That was great to see that trick, best thing ive seen yet.

Never seen that method of tuning nitro engine ,learn something new everyday

Hi I'm wondering if you can help. I've managed to calibrate but I've got no reverse. And my motor will only work with the sensor wire disconnected

Hye mate, where can I get the spring loaded battery holder for SNRC?

Great illustration, I would love to get some battery spacers from you! Let me know shipping cost